Ride Rail Conveyor
Above is a standard build Ride Rail Conveyor.
Sizing Notes
- Blue tempereed blue steel RC 46-48
- Standard is 1” tall *
- Additional Sizes:
- 0.75”, 1.00”, 1.25”, 1.50”, 1.75”, 2.00”, 2.25”, 2.50”
- 3.00” to 10.00” @ 1/2” increments
- Stainless Steel is available
Table for Odering
Send an email to wrighteng_sales@wowway.com with the information outlined in the table below. Please include the shipping address and your contact information.
| Description | Note | Axis | Measurement |
|---|---|---|---|
| Opening Diameter | Width of part plus 0.06” Approximately | Z | _ |
| Minimum = 2.50” | Additional sizes 3.00” to 10.00” @ 1/2” increments | Y | _ |
| Overall Part height plus 0.06” | 0 if not needed | X | _ |
| Bearing Pitch (Standard 1” Centers) | Straight conveyor 0.75”; Curvered 0.81”; Parts should contact 3 BRGs/side | W | _ |
| 1/4-20. 5/16-18. 3/8-16 | V | _ | |
| 1/4-20. 5/16-18. 3/8-16 | U | _ | |
| Lenght of Conveyor in feet | If longer than 10 FT ships in 10 FT lengths, spliced at installation | T | _ |
| Part Material | The material that the part using this conveyor | - | _ |
| Part Name | The name of the part using the conveyor ex: cam shaft | - | _ |
| Part Weight (lbs) | The weight of one part that will be using the conveyor | - | _ |
Blueprint form
The table above is an expanded version of a typical blueprint form shown below.
